Synco G2(A2) Wireless Microphones
Wireless Microphone System with 1 receiver and 2 transmitters, Lavalier microphones, cables, and accessories
Did You Know That ... We Teach We Deliver We Support You Can Earn Points
$199

WIRELESS MICROPHONES SYSTEM WITH 2 TRANSMITTER
The SYNCO G2(A2) is a dual wireless microphone. It comes from G1(A2) and is reborn with a display to show all main indicators. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. With 1 receiver and 2 transmitters, G2(A2) records two sound sources at the same time, applicable to a wide range of content creations.
The SYNCO dual wireless microphone system G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.
The 3-in-1 charging solution allows the charging of this 2 channel wireless microphone (2TX+1RX) at the same time with one power source. It takes only 40 min to get the system 50% powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour continued working if fully charged.

QUICK CHARGE AND INTEGRATED SIGNAL PROCESSING
The Digital Signal Processor (DSP) chip in the professional dual wireless microphone system optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery is a guarantee of the almost zero latency transmission and quality sound production, perfect for immediate use and great for live broadcast.
A button is set to mute the system for a while when it comes to team communication, device setup, etc., rather than completely turning off the system.
The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, allowing the microphone system to work in more conditions. Mobile content creators would like this dual channel wireless microphone system. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, very easy to be concealed and very inconspicuous in most recording scenarios
- Connector Type: 3.5 mm Jack
- Special Feature: Clip, 2-in-1 Charging Cable, TFT Display Screen
- Compatible Devices: Camcorder, Tablet, Camera, Smartphone
- Color: Black
- Included Components: 3.5mm TRRS Smartphone Cable x 1
- Polar Pattern: Omnidirectional
- Item Weight: 39 Grams
- Transmitter (TX )
Wireless Transmission – Digital 2.4GHz
RF Frequency Band 2400-2483.5MHz
Frequency Response. 20Hz-20KHz
Working Distance – 492ft/150m(LOS area), 164ft/50m(NLOS area)
Mounting – Pocket Clip
Audio Input – 1/8″ / 3.5mm TRS Mic Input
Audio Input Level – 1V (0dBV)
RF Output Power. <10mW
Power Requirements – 3.3V-4.7V
Battery Type – Built-in Lithium Battery, 400mAh
Battery Charging Time – 1.5h
Battery Life – 8h
Display – TFT Screen
Dimensions – 52×42×17mm
Material – Plastic
Weight – 39g
- Receiver (RX)
Wireless Transmission – Digital 2.4GHz
RF Frequency Band 2400-2483.5MHz
Approximate RF Sensitivity. -81dB
Working Distance – 492ft/150m(LOS area), 164ft/50m(NLOS area)
Mounting – Pocket Clip
Number of Audio Channels – 1
Audio Output – 1/8” / 3.5mm TRS Mic Output, 1/8“ / 3.5mm TRS Headphone Output
Gain – 0-5 Level
Audio Output Level – Line Out: 1V; Monitoring: 25-30mW
Power Requirements – 3.3V-4.7V
Battery Type – Built-in Lithium Battery, 400mAh
Battery Charging Time – 1.5h
Battery Life – 8h
Display – TFT Screen
Dimensions – 52×42×17mm
Material – Plastic
Weight – 39g
- Microphone
Form Factor – Built-in/External Mic
Sound Field – Mono
Polar Pattern – Omnidirectional
Frequency Range – 50Hz-20KHz
Sensitivity. -40dB (±3 dB, re 1V/Pa at 1KHz)
Max. SPL – 135dB SPL (at 1KHz)
- 2 Transmitter (TX )
- 1 Receiver (RX)
- 2 Lithium Ion battery
- 2 Lavalier Microphone
- Charging Cables
- Carrying Case