Synco G2(A1) Pro Wireless Microphone
SYNCO G2(A1) PRO 2.4GHz Wireless Lavalier Microphone System, Transmitter with Receiver, Safe Audio Track, Adjustable Recording, Magetic Back Clip, and Real-time Monitoring
Did You Know That ... We Teach We Deliver We Support You Can Earn Points
$199

WIRELESS MICROPHONE FOR MOBILE AND CAMS
The SYNCO G2-A1 PRO Wireless Microphone System is ideal for content creators and mobile journalists utilizing multiple devices to record interviews and vlogs due to the system’s wide compatibility from DSLR and mirrorless cameras to smartphones and mobile devices.
The system features a single transmitter with built-in microphone, a dual-channel receiver, a lavalier microphone, and a charging case to hold the devices and replenish their battery.
The compact, dual-channel receiver features both a 3.5mm TRS and a USB-C output to deliver digital or analog signals to your camera, audio recorder, or smartphone. Included 3.5mm TRRS, TRS, and USB-C cables help facilitate these connections. You can even use the USB-C to USB-A adapter in tandem with the 3.5mm headphone output to plug the receiver into your laptop and monitor your system in real-time
- Safe Audio Track For More Protection: The right channel of G2 Pro is 6dB smaller to avoid sound blasting and howling
- Intelligent Noise Reduction For Better Sound Quality: Active noise reduction once the transmitter recording , SNR(Signal to Noise Ratio) up to 80dB.
- Upgrade The Digital Output for Wider Compatibility: Digital output port can be highly compatible to mobile phones, cameras, tablets and other devices
- TFT real color display for Recording status displayed in real time: TFT screen shows all kinds of current recording situations in real time with delicate and vivid image, which can High refresh rate
- Syncoder 4.0 For More Stable 200m- Transmission: Syncoder 4.0 improves the signal transmission stability and audio fluency in complex surroundings
- Upgrade The Magnetic Back Clip for imperceptible recording: Real-time digital monitoring Upgrade digital monitor that he receiver can not only “hear” the radio from the transmitter, but also from the input of devices.
- Charging & Storage Case For Contact Power Charging: Upgraded power management chip with low consumption that fully charged in 2 hours and battery life for 8 hours.
- Transmitter (TX )
Wireless Transmission – Digital 2.4GHz
RF Frequency Band – 2400-2483.5MHz
Working Distance – 492ft/150m(LOS area); 164ft/50m(NLOS area)
Sampling Rate – 48KHz
Bit Depth – 16Bit
SNR. ﹥75dB
Audio Input – 1/8″ / 3.5mm TRS Mic Input
RF Output Power – 20dB
Power Requirements – 3.3V-4.7V
Battery Type – Built-in Lithium Battery, 400mAh
Charging Port – USB-C
Battery Charging Time – 1.5h
Battery Life – 8h
Dimensions – 52×42×16mm
Material – ABS
Weight – 35g
- Receiver (RX)
Wireless Transmission – Digital 2.4GHz
RF Frequency Band – 2400-2483.5MHz
Working Distance – 492ft/150m(LOS area); 164ft/50m(NLOS area)
Sampling Rate – 48KHz
Bit Depth – 16Bit
Antenna – Built-in
Number of Audio Channels – 2
Monitoring – 3.5mm In-Ear Monitoring
Audio Output – Lightning/ Type-C Output
Gain – 0-3 Level
Power Requirements – 5V 1A
Dimensions – 55X31X13mm
Material – ABS
Weight – 12g - Microphone
Form Factor – Built-in Mic
Sound Field – Mono
Polar Pattern – Omnidirectional
Frequency Response – 50Hz-20KHz
Sensitivity -42dB (±3dB, re 1V/Pa at 1KHz)
Max. Input SPL – 110dB SPL (at 1KHz)
- TX Transmitter x 1
- RX Receiver x 1
- Eject Pin x 1
- 3.5mm TRRS smartphone cable x 1
- 3.5mm TRS camera cable x 1
- Type C to Type A Adapter
- USB C Charging Cable x 1
- External Lav Mic (with Wind Muff) x 1
- Furry Windshield x 1
- Carrying Charging Case x 1
- Instruction manual x 1